TPS Controller
Control the sequence and the position – with a TPS controller, you are always sure that the operator tightens the joints in the correct sequence and in the correct position.
- 50 jobs and 500 positions available
- OK/NOK signal on position; tool will not start out of position
- Works with Atlas Copco electric tools and RE controlled pneumatic tools
- Easy and fast set up and programming
- Error proofing solution
- ESD approved
—————————————————————————————————————————————————————————————————————–
TPS Positioning Torque Arms
SMC POSI L
SMC carbon arm with 1 encoder to measure the distance the arm travels. This arm can work in both horizontal and vertical positions and thus be roof or wall mounted.
- Carbon arm with position control up to 200 Nm
- Encoder measures the distance the arm travels
- Verify position due to distance
- Accuracy of encoder 0.32 mm
- Control position and sequence together with TPS controller
SML / SMS T
The Atlas Copco T-series of arms are built to handle the most demanding industrial situation when it is necessary to control sequence and position. The T-series arms are equipped with 2 encoders; the SMS has 2 angle encoders to determine the position and the SML has 1 linear encoder and 1 angle encoder to determine position.
- Control position and sequence together with TPS controller
- Excellent working area for work bench assembly stations
- Available up to 100 Nm
SMC POSI LA
SMC carbon arm with 2 encoders to measure the distance the arm travels and the angle of the arm to determine the position of the arm/tool. This arm can also work in both horizontal and vertical positions.
- Accuracy of encoder is 0.32 mm
- Control position and sequence together with TPS controller
- Arms available up to 200 Nm
